tommy breeze – Bike Intelligencer http://bikeintelligencer.com All bike, all the time Wed, 11 Nov 2015 18:11:49 +0000 en-US hourly 1 Joe Breeze Q&A: A legend revives his signature bike http://bikeintelligencer.com/2010/06/joe-breeze-qa-a-legend-revives-his-signature-bike/ http://bikeintelligencer.com/2010/06/joe-breeze-qa-a-legend-revives-his-signature-bike/#comments Wed, 23 Jun 2010 06:20:25 +0000 http://bikeintelligencer.com/?p=3528 After a decade off doing commuter bikes, Joe Breeze is back in the mountain bike game he helped invent in the 1970s.

The post Joe Breeze Q&A: A legend revives his signature bike appeared first on Bike Intelligencer.

]]>
[Note: Mountain biking legend Joe Breeze announced a few days ago that he was returning to his founding sport after a prescient and hugely successful line of commuter bikes over the past decade. Joe graciously agreed to expand on his back-to-the-future path in an email Q&A.]

The day after you stopped making mountain bikes, your fans began begging you to come back. Why now, given the shaky economy?

Back in 1998, it was a tough decision to not make mountain bikes. I made the choice because I felt it was time to focus on transportation bikes, which were virtually unknown in the US and extremely important for many reasons. With me as sole designer, spokesperson etc for Breezer, doing mountain bikes at the same time would have been too big a distraction. Now transportation bikes are an established and successful category, with Breezer being recognized as a leader. Since I teamed up with a much bigger company, Advanced Sports Inc. (late 2008), I’ve finally been able to re-enter the mountain bike field. We’re still focused on transportation bikes, but ASI also wanted to do Breezer mountain bikes and so did I. I don’t know exact demand/numbers, but the level of enthusiasm of the people who take time to find me and ask for mountain bikes has always been an encouragement. We chose to start with a hardtail because 1) people had been asking for an updated Breezer hardtail, 2) it was relatively easy to do, and 3) hardtails are still quite viable.

Back in the day on the first Breezer




You talk about steel’s strength as a frame material and have gone with a curved downtube. How’s the process work?

Fork blades, chainstays and other tubes on frames are bent cold after the tube has been drawn. Breezer downtubes are hydro-formed, but structurally the result is essentially the same. The curved down tube is to allow clearance for the 100mm-travel fork. I could have continued the tube straight to the head tube without curving, but the tube would’ve intersected the head tube a long ways from its lower end. Without a gusset, that would’ve resulted in a weak structure. With a gusset, it would deaden the ride quality. A curved tube was the best solution.


”The lightest for their strength.” How lighter than ti, and how stronger?

I should have made it clear that I was speaking in the context of the bikes’ individual materials: steel (Lightning) and aluminum (Thunder). In each material, I work to make the lightest frame per strength. It is possible to build a titanium frame that’s lighter/stronger, but it’s a challenge. Unfortunately the gains with Ti are small or non-existent because Ti tubing and joinery is less sophisticated than the steel and aluminum counterparts, owing to titanium’s expense and difficulty to work with. Ti suffers from poor economy of scale.



Breezer's new Thunder Elite

You’re an American icon. Are these American made (why or why not)?

These 2010 Breezer mountain bikes are made in Taiwan. It really is not economically feasible to make this product in the USA. You may recall that some time ago in the USA, bikes equated to about zip. Zip was unappealing to build. Zip was eagerly taken over by countries where people saw a future in it. They built it. The industry grew there and it is there. It’s nice that you see me as a game changer or a visionary, but change that?

Breeze tears it up aboard the new Thunder Elite. Photo by Wil Matthews/Singletrack.com



For us old-school detail geeks, can you say a few words about the head badge?

The badge is etched and painted brass and attached with drive screws. I arrived at the design in 1982. It is similar to the badges on the 1930s and 40s Schwinns we once rode, as is the “spears and diamonds” paint job. The badge depicts Mt. Tam in my Marin County backyard. The road down the middle is Old Railroad Grade, remnant of the Mt. Tamalpais & Muir Woods Scenic Railway (1896-1930). This was the scene of my first fat-tire ride, in 1973. There are redwoods and blue lupine. The road in the foreground is Rollercoaster Ridge, and the tire is a Stumpjumper, the best tire of its day.



What can you say about the forthcoming 29ers?

In 2011, we will offer four hardtail 29ers, two in aluminum and two in carbon fiber. One priority has been to make them great climbers. [Note: See accompanying press release.]



Rather than sell your brand to Trek or a similar megacorporation back in the ’90s, you stuck with small and boutique. Assuming you’d agree it was the right choice, did it offer any advantages in the evolving marketplace?

Courtesy BikeRumor.com

It was never my goal to stay small, but it was my goal to follow my heart. From my teen years I’ve had a vision that bicycling in America can be huge someday. Mountain biking is merely a single stepping stone along that path. The road-racing stone preceded it. Transportation biking is the key to success for all three. Following one’s heart in a string of new, risky pursuits is rarely a surefire way to monetary success. I measure success in the ability to stay in business and effect change. My role has often been to encourage others in the business that, say, mountain bikes (way back when) or transportation bikes (more recently) could make them money. Once the bike transportation market heated up, as it did in 2008, it was time to turn up the volume. That’s when I sold Breezer to Advanced Sports Inc., makers of Fuji, Kestrel and SE Bikes. Their extra horsepower allows economy of scale for what is still a very personal brand. It led, for example, to Breezer mountain bikes being on the market once again. It has allowed me to focus full time on design rather than running the business.


What’s the biggest surprise to you about how the sport of mountain biking has evolved?

The biggest surprise to me came quite a few years back, and that is how big the sport became in Europe, or that it happened there at all — that an American product was embraced so fully. I had never felt that Europe needed anyone’s help regarding bikes.


What’s the most impressive innovation in cycling you’ve seen (that you didn’t do yourself)?

Indexed shifting.



Is your son faster than you? Or does dad still rool?!

As Tommy approached his teens I knew I’d need to get in better shape if I was going to ride with him for long. Last year he joined the Drake High School mountain bike team and became a top-10 Freshman in NorCal racing. I’ve stepped up my program, but increasingly he’s a speck on the horizon. I still give him a run for his money on the downhills though.

The post Joe Breeze Q&A: A legend revives his signature bike appeared first on Bike Intelligencer.

]]>
http://bikeintelligencer.com/2010/06/joe-breeze-qa-a-legend-revives-his-signature-bike/feed/ 5